Flexbone Varied is a high load-bearing, waterproof uncoupling membrane that accommodates lateral movement. A fast-track system, it can be used for a number of installations including heavy trafficked areas

Includes patented GripLock technology for greatest adhesive shear strength (50% better than other cavity mats) and unique bone structure enabling high flexibility and excellent deformability

High shear strength provides for higher levels of lateral movement

Special fleece provides for vapour pressure compensation.

Flexbone Varied needs less adhesive on the face of the mat, with circa 30% faster application! As it is waterproof, it is perfect for use in wet areas and no additional tanking is needed

It can be tiled on immediately after laying

Use for:

Counteracting and minimising tension stresses between substrate and floor to be tiled

Prevents reflective cracking caused by shrinkage cracks, board joints and lateral movement

Installation of large format ceramic, porcelain, slabs and natural stone tiles with minimum edge length of 100mm

Crack bridging and allowing safe installation on challenging substrates

Internal flooring in high traffic areas in domestic and commercial areas

Heated screeds, new cement screeds, timber floors and existing floor surfaces

Waterproofing wet areas – no tanking required

Colour: Grey

Pack sizes:  20m rolls, 1 x 2m sheets

Sheet Width: 1m

Sheet Thickness:  3mm

Roll Weight: approx. 18kg